 Produtos |
|
|
24-port 10/100Mbps Dual Speed SNMP Stackable
Master Hub
TE100-DM24 |
|
The TE100-DM24 dual speed SNMP stackable
master hub provides a phenomenal level of flexibility and ease of
use for migration to higher bandwidth network environments. Each
port auto-senses between 10Mbps Ethernet and 100Mbps Fast Ethernet.
Once the port speed is determined, the hub creates independent segments
for the 10Mbps and 100Mbps ports. Linking the 10Mbps and 100Mbps
segments together is achieved through an optional switch module.
The optional TE100-DSM switch module can be installed in any hub
in the stack, making it possible to transparently bridge between
10Mbps and 100Mbps segments. In a managed hub stack, more than one
TE100-DSM module can be used to provide automatic redundancy.
The TE100-DM24 is a SNMP Master hub which will control up to four
TE100-DS24 stackable hubs via integrated management ports. A stack
of TE100-DM24/DS24 hubs operates as a class II Fast Ethernet repeater,
allowing linkage to another Class II Fast Ethernet Stack in the
same collision domain.
One 100Base-TX switched port module and one switched 100Base-FX
port are also available, in addition to the TE100-DSM switch module,
for greater configuration flexibility.
|
Produto Descontinuado
O TE100-DM24 foi descontinuado. Para uma lista de produtos descontinuados,
clique aqui.
|
| |
| Características |
- Plug and Play installation with automatic port configuration
- Supports 24 10/100Mbps auto-sensing and auto-negotiation ports
- Uplink port provides easy expansion to another hub
- Stackable to five units for a total of 120 ports
- Scalable expansion of up to two stacks for a total 238 ports
- One management hub) controls an entire stack of dual speed hubs
(max. four hubs)
- TE100-DM24 stacks can make use of additional switch modules
for redundancy
- EIA-19" rack mountable
- High visibility LED indicators provide status for each port
- Bandwidth utilization LED array for traffic volume display
- Automatic Hub ID assignment and front panel display
- Built-in auto-partitioning instantly isolates network failures
- One RS-232 port allows local terminal access to hub configuration,
diagnosis, and firmware upgrade
- Slide-in switch module allows bridging between 10Mbps and 100Mbps
segments, just one switch module is required for entire stack
- Slide-in switch module for one 100Base-TX connections or one
100Base-FX connection
- 5 Year Warranty
|
| |
| Especificações |
| Padrões: | IEEE 802.3µ 100Base-TX/100Base-FX,
and IEEE 802.3 10Base-T |
| Protocol: |
CSMA/CD |
| Speed: |
10Mbps for
10Base-T/100Mbps for 100Base-TX |
| Cabling: |
- CAT 3,
4, 5 UTP/STP for 10Base-T
- CAT 5 UTP/STP for 100Base-FX 62.5/125
micron multi mode SC fiber (2km)
|
| Daisy-Chain Port: |
SCSI
50 pin x 2 |
| Console Port: |
DB-9
(9 pin) DCE RS-232 x 1 |
| LED’s: |
- Per Hub: Power, Collision (10, 100) Slot 1 or 2, Hub ID,
Bandwidth Utilization %, Console and SNMP
- Per Port: Link/Rx, Auto Partition, Disable, Port Speed (10Mbps,
100Mbps)
|
| Power: |
Internal
Power Supply, (100 - 240V, 50/60Hz) |
| Dimensões |
441
x 237 x 55 mm / 17.36" x 9.33" x 2.17" (L x W x
H) |
| Peso |
3.87 kg
/ 8.53 lb. |
| Temperatura |
- Operação: -10° to 55° C / 14° to 131° F
- Armazenagem:-25° to 80° C / -13° to 176° F
|
| Umidade |
5% to
95% (sem condensação) |
| Certificados |
FCC,
UL, VCCI, CSA, C-tick, TUV, CE |
| |
| Projeto de Rede |
 |
|
|
| Info |
| Benefícios |
Upgradable:
Ethernet workgroups can be upgraded to Fast Ethernet without changing hubs. |
Expandable:
Connect up to 120 users per stack. Also stackable with TE100-D16s hubs. |
Flexible:
All 10 and 100Mbps users can exist on one hub. |
Cost
Effective:
Provides 10Mbps and 100Mbps SNMP stackable hub, and 10/100Mbps switch functionality
in one unit. |
Performance:
Full 100Mbps connectivity significantly boosts network performance. |
| Produtos Relacionados |
|
Top 
